中文 English
 HOME  ABOUT US European style doors iis7站长之家 CERTIFICATES NEWS FEEDBACK CONTACT US
Category
Double doors
European style doors
Interior doors
Sliding doors
High-end wine
Cupboard
Solid wood cabinets
Solid wood wardrobe
Solid wood bathroom cabinet
Solid wood furniture
Solid wood staircase
Weatherboarding
Rome column
Contact Us
GuangZhou LianNuo door Co.Ltd
Add:No.2588 Guangcong Road,Taihe Town,Baiyun District,Guangzhou,China
Orders:0086-20-28034120
Fax:0086-20-28070705
Service:0086-20-28034121
Mobile:0086+18620133214
E-mail:cev888@163.com
Contact:Linda
News

广东木门厂

Time: 2016-12-19   Views: 1492
wood - wood species
 The classified method of wooden door is very much, there are three kinds of commonly used.According to the material pointsThat high-grade wood door all USES rare wood the grade style of show room and master culture culture, connotation.Existing rare wood of walnut, cherry, the sand Billy, the shadow wood, maple, teak, etc. More than 10 kinds.Is a room USES a tree commonly, make approximate colour and lustre, form the tree inherent style system, there is no special requirement, do not use a variety of tree species mixed and disorderly use.According to the door type and processBoard type door, core board door, glass door, half bo door, etc.Board type door is airtight model, no pervious to light point of perspective, multi-purpose at door and bedroom door, this can carve sunken line and line of the protruding that make, model system is beautiful and easy, integral sex is good.Core board door is in the middle of the door is equipped with one or more core board, convex, stereo artistic quality is strong.Complete bo door is with glass as the main body of the door leaf, there were only four door edge and terminals, the rest are made of glass, with bright light, good body permeability characteristics, rich strong artistry and appreciation sex.Half bo door is above half for glass, below half for board type, have proper transparency.According to utility centSuch as door family, bedroom door, study door, backstairs, bathroom door, etc., the room door of apartment guesthouse, bath defends door, corridor door, office commercial door, etc.According to different purposes, to norms, style, performance, all have different requirements. In addition, such as with the door open means points, swing doors, sliding door, such as single open, double open the door.Such as points, in finished product door products form are: single door, complete sets of the door (or ready door, suit door).As to the material classification: wooden door is
  divided into: the original wood door, solid wood composite door, solid wood doors, molded doors.The choice of wooden door and distinguish the original wood door and real wood doorThe original wood door and real wood doorThe original wood door adopt a kind of lumber, inside out.Identify when can according to the characteristic of natural lumber, respectively, such as normal the phenomenon of natural lumber existence chromatism or stammer, can also distinguish whether both sides of the wood grain is consistent (not) and so on.The original wood door is real wood door series of high-end products, is also precisely because it is a high-end products, so the big manufacturers of the original in the machining process of wooden door, wooden door to wood through a series of dehydration, drying and processing of the mechanical properties, can guarantee the stability of the wooden door.In the process of buying door guard of fabrics, the be clear at a glance that makes the difference between the original wood door and real wood door.The original wood door is real wood door series of high-end products, line is not very obvious. Make more difficult to select material, production technology is very high. Use paint technology is also different.(1) the four founder, width increase to 10 mm(2) the frame width specifications for 800-2000 - mm, table plate is 6 mm MDF, Shao Er rand hollow and filled with middle plate.(3) lock wood, also can use the lock box.(4) set is box, glass door, determine size and location of glass(5) skeleton do prevent deformation after processing, press press flat4, and hot-pressing process standards(1) before each put to compression artifacts, hot plate and workpiece must be clean, make sure no any impurities, good hot pressing temperature and pressure, slowly into the workpiece.(2) into the artifacts to an orderly, make the machine to receive strength evenly in each place.(3) each hot-pressing all position as full as possible, and to ensure that the thickness of each layer plate and each layer of wrapping material is the same, the door small plait understand wrapping material can't overlap, if can't put the spare plate filled with application of workpiece thickness.(4) to prevent glue dry, feeding should be completed in two minutes each time, determine the correct and safe, and then start the machine.(5) pressure after the workpiece surface must level off, smooth, touch without bump, the sense of particles.(6) spelling a flower should be aligned.(7) after wrapping, wooden door shall not degumming, transparent glue, cascading from the core, scratches, indentation, touch block, dislocation, oil pollution, basically the same color.5, cold-press process standards(1) cold pressing time should be according to the temperature, ensure rubber curing, glued firmly.(2) after pressure, type surface must level off, smooth, touch without bump, the particles.6, neat edge cutting(1) cutting material cutting standard error is less than 0.2 MM(2) into the workpiece, pressure plate and workpiece should be removed.(3) into the workpiece may not dislocation, up and down with the core board alignment, slag shall not crack.(4) on both sides of the door leaf should be 2 degrees, the rest should be cut into straight, not scratch touch.7, milling door core board process standards(1) milling door core board, material strength, no collapse.It (2) the appearance smooth, coordinately.(3) in proportion to the milling, size accurate, not collapse holes;8, handmade leather(1) skin with white latex, must first pass dry brush again after the second time, then use iron.(2) tablets with wooden shovel pressure.;(3) after the stick, can not have from the seam, degumming, bubbling, wood veneer cracking phenomenon.9, lock, hinge holes(1) pay attention to the door open direction;(2) pay attention to the top and bottom side door, can not turn around.(3) shall not have collapse of ballastless, scratches, and use special mould, clamp clamping rear can drill.10 and fitting(1) the door act the role ofing line Angle of profiled, must not leave seam;(2) doors and door cover tightly, level off, shall not leave seam;(3) the door leaf can not have clearance to shake;11, paint(1) before grinding, dialogue billet inspection, for degumming, bubbling, scratches, touch products processing;(2) white base shall be smooth, nailhole, gap to be filled;(3) primer to spray evenly, and check the presence of degumming, bubbling, after being dry polishing.(4) when the spray paint can not have particles, sagging, peeling, luster in accordance with customer requirements;12, packaging, warehousing(1) carefully check the door leaf door cover is not complete, the quality is unqualified, unqualified products are not allowed packaging factory, it is forbidden to wrong color, color, the product to should take put down gently;(2) the packaging before, should remove the glue mark on the surface of the work and impurities, and packaging film, protected with corrugated paper four door Angle;(3) label, put in storage after fill in the receipt.13, installation,(1) determine the mouth of the cave and the door, after having confirmed to set cover, set set of calibration, glue, install door leaf;(2) the door and the wall of our glass glue is convergent, the door should glue more below, to prevent excessive water into the door
HOMEABOUT USEuropean style doors iis7站长之家CERTIFICATESNEWSFEEDBACKCONTACT US
Copyright:GuangZhou LianNuo door Co.Ltd
Add:No.2588 Guangcong Road,Taihe Town,Baiyun District,Guangzhou,China
Orders:0086-20-28034125 Fax:0086-20-28070705 E-mail:gzliannuo01@hotmail.com/cev888@163.com